XIAO nRF52840 — Thread + 6LoWPAN + UDP

Assume:

XIAO #1 = LEADER XIAO #2 = CHILD

Leader COM26 Child COM27

UDP Port = 12345

Your actual COM ports can of course change.

1. LEADER — complete command sequence

Start with the Leader XIAO.

Step 1 — Clear old dataset

dataset clear

Expected:

Done

Step 2 — Create a NEW Thread network

dataset init new

Expected:

Done

This generates a new random Thread Operational Dataset containing things such as:

Channel
PAN ID
Extended PAN ID
Network Key
Network Name
Mesh-local prefix
PSKc

OpenThread documents dataset init new specifically for creating a new dataset.

Step 3 — Display the dataset

Immediately do:

dataset

You should get something similar to:

Active Timestamp: 1 Channel: 21 Channel Mask: 0x07fff800 Ext PAN ID: xxxxxxxxxxxxxxxx Mesh Local Prefix: fdxx:xxxx:xxxx:xxxx::/64 Network Key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Network Name: OpenThread-xxxx PAN ID: 0xxxxxxx PSKc: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Security Policy: 0, onrcb Done

Important: keep this information.

Step 4 — Commit the dataset

dataset commit active

Expected:

Done

This writes the Operational Dataset as the Active Operational Dataset.

Step 5 — Bring up IPv6

ifconfig up

Expected:

Done

Step 6 — Start Thread

thread start

Expected:

Done

Now check:

state

Initially it may show:

detached

Then after a short time the Leader should become:

leader

You can repeatedly use:

state

The normal target is:

leader

2. Get the Leader's complete dataset

This is the most important command for creating the Child.

On the Leader:

dataset active -x

You will get a long hexadecimal string, for example:

0e080000000000010000000300001035060004001fffe00208xxxxxxxxxxxxxxxx...

Copy the entire line.

OpenThread specifically supports dataset active -x for obtaining a hex-encoded Active Operational Dataset that can then be applied to another device with dataset set active.

3. Check Leader IPv6 addresses

Run:

ipaddr

You may see something like:

fdxx:xxxx:xxxx:xxxx:0:ff:fe00:xxxx fdxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx fe80:....

For our UDP test, we'll normally use the Thread mesh-local IPv6 address, beginning with:

fd...

For example:

fd00:abcd:1234:5678:xxxx:xxxx:xxxx:xxxx

Don't use the fe80:: address for this simple test.

4. Test that Leader is working

You can check:

thread state

or simply:

state

You can also check:

ipaddr

And:

netdata show

For a simple two-node experiment, the important result is:

state leader

5. CHILD — complete command sequence

Now move to the second XIAO.

First clear whatever old network information it has.

dataset clear

Then:

ifconfig down

Then:

thread stop

If the board wasn't running Thread, that's okay.

6. Give the Child the Leader's dataset

This is where your previous procedure needs to be slightly changed.

DO NOT do this on the Child:

dataset init new

because that creates a new network.

Instead, take the hexadecimal string obtained from:

dataset active -x

on the Leader.

Then on the Child:

dataset set active YOUR_LEADER_DATASET_HEX

For example:

dataset set active 0e080000000000010000000300001035060004001fffe00208xxxxxxxxxxxxxxxx...

Expected:

Done

This is the documented way of putting the same Active Operational Dataset onto a new device.

7. Start the Child's Thread interface

On Child:

ifconfig up

Then:

thread start

Expected:

Done

Wait a few seconds.

Then:

state

Expected:

child

You might briefly see:

detached

before:

child

That is normal during attachment.

8. Check Child IPv6 addresses

On Child:

ipaddr

You should get something like:

fdxx:xxxx:xxxx:xxxx:0:ff:fe00:xxxx fdxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx fe80:....

Again, note the fd... address.

For example:

fd00:abcd:1234:5678:1111:2222:3333:4444

We'll call that:

CHILD_IP

9. Verify Leader ↔ Child connectivity

Now go back to the Leader.

Take the Child's fd... address.

Run:

ping CHILD_IP

For example:

ping fd00:abcd:1234:5678:1111:2222:3333:4444

Expected:

16 bytes from fd00:abcd:1234:5678:1111:2222:3333:4444: icmp_seq=1 hlim=64 time=10ms

1 packets transmitted, 1 packets received. Packet loss = 0.0%.

That proves: Leader communicates with the Child through IPv6 over the Thread/6LoWPAN network.

6LoWPAN Communication Flow

10. Now configure UDP

This is where your screenshot becomes particularly useful.

Let's make:

Leader = UDP SERVER Child = UDP CLIENT

Port = 12345

11. LEADER — UDP server

On the Leader:

udp open

Expected:

Done

Then:

udp bind :: 12345

Expected:

Done

This means:

IPv6 address = :: UDP port = 12345

The :: means the unspecified IPv6 address, allowing the socket to accept traffic on the available IPv6 addresses. This is the standard OpenThread CLI UDP procedure.

You now have: LEADER UDP socket- port 12345

12. CHILD — UDP client

On Child:

udp open

Expected:

Done

You don't actually have to bind the Child for a simple send test.

Now take the Leader's IPv6 address.

For example:

fd00:abcd:1234:5678:aaaa:bbbb:cccc:dddd

Then:

udp send fd00:abcd:1234:5678:aaaa:bbbb:cccc:dddd 12345 Hello_Leader

Expected:

Done

OpenThread's official UDP example follows exactly this pattern: udp open, optionally udp bind, then udp send <IPv6> <port> <message>.

13. What should happen?

On the Leader, you should see something similar to:

Received UDP message depending on the particular OpenThread CLI build.

Conceptually:

         THREAD NETWORK
  ┌─────────────────────────┐
  XIAO #2                 XIAO #1
  CHILD                   LEADER
    │                       │
    │                       │
    │  IPv6 / UDP           │
    │──────────────────────>│
    │                       │
    │ "Hello_Leader"        │
    │                       │
  COM27                   COM26

  UDP destination port: 12345

14. Reverse direction — Leader → Child

If you want the Leader to send a message back to the Child, bind the Child.

On Child:

udp bind :: 12345

Then on Leader:

udp send CHILD_IP 12345 Hello_Child

For example:

udp send fd00:abcd:1234:5678:1111:2222:3333:4444 12345 Hello_Child

Now you have bidirectional UDP:

CHILD ────────────────► LEADER

      Hello_Leader

CHILD ◄──────────────── LEADER

       Hello_Child

15. The complete cheat sheet

LEADER

Run these in this order:

dataset clear dataset init new dataset dataset commit active

ifconfig up thread start

state ipaddr dataset active -x

Then test the Child:

ping CHILD_IP

Then UDP server:

udp open udp bind :: 12345

CHILD

Use the Leader's dataset:

dataset clear ifconfig down thread stop

Then:

dataset set active LEADER_DATASET_HEX

Then:

ifconfig up thread start

Check:

state ipaddr

Expected:

child

Then UDP:

udp open

Send to Leader:

udp send LEADER_IP 12345 Hello_Leader

16. Full two-way UDP setup

LEADER

dataset clear dataset init new dataset dataset commit active ifconfig up thread start state ipaddr dataset active -x

Copy the dataset.

Then:

udp open udp bind :: 12345

CHILD

dataset clear ifconfig down thread stop dataset set active LEADER_DATASET_HEX ifconfig up thread start state ipaddr udp open

Then:

udp send LEADER_IP 12345 Hello_Leader

For reverse communication, on Child:

udp bind :: 12345

Then on Leader:

udp send CHILD_IP 12345 Hello_Child

17. Useful diagnostic commands

Purpose	Command
Show current Thread state	`state`
Show IPv6 addresses	`ipaddr`
Show current dataset	`dataset`
Get dataset as hex	`dataset active -x`
Create new network	`dataset init new`
Clear dataset	`dataset clear`
Commit dataset	`dataset commit active`
Bring IPv6 up	`ifconfig up`
Bring IPv6 down	`ifconfig down`
Start Thread	`thread start`
Stop Thread	`thread stop`
Show Thread neighbors	`neighbor table`
Show Thread network data	`netdata show`
Test IPv6 connectivity	`ping <IPv6>`
Open UDP socket	`udp open`
Bind UDP socket	`udp bind :: 12345`
Send UDP	`udp send <IPv6> 12345 <message>`
Close UDP	`udp close`
UDP help	`udp help`
Thread help	`thread help`
Dataset help	`dataset help`

The current OpenThread CLI reference lists these dataset and UDP operations, including dataset clear, dataset commit active, dataset init, udp open, udp bind, udp send, and udp close.